4 channel 3G&SD Mobile DVR ORT603

4 channel 3G&SD Mobile DVR ORT603
  • 4 channel 3G&SD Mobile DVR ORT603
Mobile DVR (Digital Video Recorder)  
Model: OBT603    
Technical Parameters:-  
Operation System Stand-alone Linux2.6 operation system
Processor H.264Main Profile.ARM9
Video Standard: PAL/NTSC
Operation Interface User friendly Graphic interface(OSD):show date,time,channel ID and etc..
GUI Setup system parameters through the remote controller
User management User / Administrator
Data storage media 1 SD card or 1 USB(customized)
Firmware Upgrade Support USB update
Buil-in GPS Geographic coordinates and driving speed can be written into the video file.
Audio and Video recording system video Input 4CH in, 1.0Vp-p 75Ω
video output 1CH out, 1.0Vp-p 75Ω
Preview 1-4CH preview
Video Bit Rate: CIF:256Kbps~1.5Mbps;HD1:600Kbps~2.5Mbps
Video Frame Rate: PAL:1-25FPS
Record Frame Rate: PAL:200fps(8 x 25fps).NTSC:240fps(8 x 30fps)
Video Quality 1-4 levels, 1 is the highest level and 4 is the lowest level.
Video Coding Resolution: Three options:D1、HD1、CIF(For example:2CH D1+2CHCIF)
Record Type: Always / Schedule / Alarm recording / Motion detection recording
Video Search Search video via time
Video Playback 1 to 4 channels playback
Forward and backward at the speed of  x 2, x4, x8, x16
Audio Audio input 1CH IN
Audio output 1CH OUT
Audio Compression format G.726,5KB/s
Alarm Alarm In/Out: 4CH IN,1CH out
Power Power management Key can be used to power on/off the machine,support scheduled machine start-up/shutdown delay.
Input voltage 8~36V
Output voltage +12V@2.5A;+5V@0.5A
Others Working Temp. -30℃~+85℃
ambient humidity 20%~80%
Size of the MDVR 168(L)×139(W)×42(H)mm
Weight of the MDVR 0.6Kg
Front Panel Layout  

LED Indicator and Status Display:
[VLOSS] Video indicator(LED ON:one or muti-channel video data lost)
[GPS] GPS LED on indicates GPS is working
[PWR] PWR LED ON confirms that unit is power supplied.
[REC] REG LED on indicates video recording status
[ERR] ERR LED on indicates SD card error
[SD] SD LED on indicates SD card is working,off indicates SD card is unloaded.
[IR] Remote controller extention cable connection port
Back Panel Layout

[GPS] GPS antenna connection  
[3G] 3G connection  
[AI/AO VI/VO] Audio/ Video Signal Inputs/Outputs connections
[EXTEND I/O] Alarm in/out and other signal connections
[POWER] Power INPUT and OUTPUT Connections(8~36V)
Related products